Download and Install MediaTek MT65xx USB VCOM Drivers

A lot of peoples are finding that how to install the MediaTek MT65xx USB VCOM Drivers on their Computer/Laptop. If you are also looking for MTK MT65xx installation solution then you are right. On this page, you will learn how to download and install MediaTek MT65xx USB VCOM Drivers on your PC.

In this post, we will also provide you the latest MediaTek MT65xx chipset preloader USB drivers and how to install step by step. First of all please make sure that your Android phone is powered by MediaTek chipset processor then you can install and run this MediaTek VCOM driver on your Computer/Laptop. Here we would like to confirm that a lot of MediaTek smartphones are supports the SP Flash tool to install the Stock ROM. To transfer any files to your smartphones such as JPEG, PDF, EPS, MP3, videos, apps, or any files, your PC must run this USB VCOM driver.

Remember: If you are using Android smartphones powered by Mediatek MT 65xx Chipset, then this driver is compatible with your device even though it will run with 66xx and 67xx Chipset.

Disclaimer: GetDroidPro will not be responsible for any kind of damage or error that occurs to your device or Computer while installing any files. Do it at your own risk.

Basic Requirements:

  • First of all, please make sure that your Android device is powered by MediaTek processor only.
  • This guide is only for MediaTek chipset processor, please don’t use these steps on any other device.
  • You need a Windows PC/Laptop and a Micro USB Cable.
  • Make sure that your device battery charged up to 70% at least.

Download and Install MediaTek MT65xx USB VCOM Drivers:

As you know, we already mentioned that this driver will run on Windows XP and above. However, for Windows 7, 8, 10, and newer, you need to disable Driver Signature Verification. You need to search on Google and find the best and best solution How to Disable Driver Signature Verification for PC running Windows 7, 8, 10 and above.


Driver name: VCOM Driver
Driver Size: 12.25KB
Download Now


On this page, you will learn how to install a VCOM USB Driver on your Laptop/PC manually. Getdroidpro always helps you on every single step, read carefully to install professionally.
Step 1: First, download and extract VCOM USB Driver on your Computer or Laptop desktop to install easily. (See below image)

Step 2: Now, you should open Device Manager from your PC/Laptop >>> Action >>> Add Legacy Hardware. (See below image)

Step 3: Click the “Next” under the Add legacy hardware wizard. (See below image)

Step 4: Now Click “Install the hardware that I manually select from the below list (Advanced)” and continue installing by clicking the “Next” button. (See below image)

Step 5: The next step is to Show all devices, click the Next button, and select files from your computer. (See below image)

Step 6: Then, select the “usb2ser_Win7” setup for the 32-bit operating system or select the “usb2ser_Win764” setup for the 64-bit operating system. (See below image)

Step 7: Now, click the “Next” to start installing your new hardware on your computer. (See below image)

Step 8: After that, Click “Install this driver software anyway” in the Windows security prompt window. (See below image)

You are done. Now VCOM driver is successfully installed on your computer.



If you would like to understand better, you must watch the below video Tutorial.

Video Tutorial

NOTE: We always suggest you before start installing UBS Drivers on your PC/Laptop. You should create a backup of all your files and save them in a safe location. If anything goes wrong the author or is not responsible for it.

Leave a Reply

Your email address will not be published. Required fields are marked *