Samsung Galaxy A7 (2018) Key Specs
Screen Size 6.0 inches, 91.4 cm2 (~74.4% screen-to-body ratio)
Resolution 1080 x 2220 pixels, 18.5:9 ratio (~411 ppi density)
Primary Triple 24 Megapixels, f/1.7, 27mm (wide), PDAF + 8 Megapixels, f/2.4, 18mm (ultrawide) + 5 Megapixels, f/2.2, depth sensor LED flash, panorama, HDR
Secondary 24 Megapixels, f/2.0, 26mm (wide) HDR 30fps
OS Android 8.0 (Oreo), upgradable to Android 9.0 (Pie)
Chipset Exynos 7885 (14 nm)
CPU Octa-core (2×2.2 GHz Cortex-A73 & 6×1.6 GHz Cortex-A53)
Sensors Fingerprint (side-mounted), accelerometer, gyro, proximity, compass
Battery Non-removable Li-Po 3300 mAh battery
VIEW FULL SPECS
If you want to connect your Samsung Galaxy A7 (2018) smartphone with Computer (PC), simply you should download usb driver. In this post we are going to share with you few different steps and guide how to install ADB usb driver in PC/Laptop to connnect your Galaxy A7 (2018) smartphone.
Free Download Samsung Galaxy A7 (2018) ADB USB Driver
Here on this page you can download Samsung Galaxy A7 (2018) usb driver, make sure that your smartphone is powered by Android 8.0 (Oreo), upgradable to Android 9.0 (Pie), Exynos 7885 (14 nm) with processer Octa-core (2×2.2 GHz Cortex-A73 & 6×1.6 GHz Cortex-A53).
USB Deiver name: ADB Driver
USB Driver Motive To connect your smartphone with PC or Laptop.
USB Driver Size: 8.3 MB
How to install Samsung Galaxy A7 (2018) ADB USB Driver in PC or Laptop?
On this page you can easily understand how to install adb usb driver in your PC or laptop, first of of all watch vidoe tutorial.
Gizte.com always provide quality content, in this page you will find all steps one by one. If you didn’t understand above video tutorial you can follow the images and instruction, step by step. We also attached few images for your reference.
Step 01: First of all you must download the USB driver and extract it on your desktop, see Image below:
Step 02: Now, You should open Device Manager >>> Action >>> Add legacy hardware. See attached picture.
Step 03: After that click the Next button see below image, in the Add legacy hardware wizard.
Step 04: Now You may choose “Install the hardware that I manually select from the list (Advanced)” and click the Next Button see below picture.
Step 05: After successfuly done, Show all devices, click the Next button and you must select the extracted file manually from your computer. Please check the below image to get an idea:
Step 06: Now to start installing your new hardware, click the Next button again, check attached below image;
Step 07: Click the Install in the Windows please see below image
Step 08: Finally you have done successfully, click the Finish button to complete installation (see below image)
Thank you so much for reading, We are here if would you like to ask anything else. We hope that you have successfully installed ADB driver on your Samsung Galaxy A7 (2018). You may enjoy your with your Android device is now connected with your Computer PC/laptop.
NOTE: We always suggest you before start installing UBS Drivers on your PC/Laptop. You should create a backup of your all your files and save on safe location. If anything goes wrong the author is not responsible for it.